Fluke 884X-RTD

Description

• Manufactured using a coil suspension element design for increased shock and vibration resistance
• Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
• Resistance Nominal 100Ω
• Temperature coefficient 0.00385Ω/Ω ºC nominal
• Temperature range -200 C to 300 ºC (transition and cable temperature: 0 ºC to 150 ºC)
• Drift rate 0.13 ºC at 0 ºC after 1000 hours at 300 ºC
• Sheath Material 316 stainless steel
• Leads Teflon-insulated, nickel-plated stranded copper, 22 AWG
• Termination 4-wire banana
• Time constant Four seconds maximum for 63.2% response to step change in water moving at 3 fps
• Bending radius 19 mm (3/4 in) except for 50 mm (2 in) area of sheath near tip
• Calibration Includes manufacturer’s NIST-traceable calibration and table with R vs. T values in 1 ºC increments from -196 ºC to 300 ºC. Callendar-van Dusen coefficients included
• Immersion At least 100 mm (4 in) recommended
• Accuracy (includes calibration uncertainty and short-term stability)±0.50 ºC at -196 ºC, ±0.050 ºC at 0 ºC, ±0.052 ºC at 200 ºC, ±0.055 ºC at 300 ºC
• Size 9 in L x 3/16 in diameter